Basic introduction of the HJ946GK mini wheel loader
HJ946GK small wheel loader in the mini wheel loader segment, improved from the HJ946B series of wheel loaders, is the largest capacity vehicle in the 4-machine series with a capacity of 87kw, which always ensures durable operation in all areas Figure. The machine is equipped with a wooden clamp and a 2.0 m3 sand bucket with a tire discharge height of 4.5 meters, a cabin height of 3m, a width of 2.2 meters, and a length of 6.6 meters. lightweight and flexible. With the height of the tires, the cabin plus the width of the car always ensure you comfortably work for a long time.
| Model | HJ946GK | HJ946GK | |
| RATED LOAD CAPACITY (kg) | 2200 | 2200 | |
| RATED BUCKET CAPACITY (m3) | 2.0 | 2.0 | |
| MAX. GRADE ABILITY (º) | 30 | 30 | |
| MIN. TURNING RADIUS (mm) | 4500 | 4500 | |
| MAX. SPEED (km/h) | 20 | 20 | |
| MAX. DUMPING ANGLE (º) | 40 | 40 | |
| MAX. DUMPING HEIGHT (mm) | 4050 | 4050 | |
| DUMPING DISTANCE (mm) | 1220 | 1220 | |
| LIFTING, LOWERING, DUMPING TIME (s) | ≦13 | ≦13 | |
| WHEEL BASE (mm) | 2650 | 2650 | |
| WHEEL TRACK (mm) | 1680 | 1680 | |
| TRANSMISSION TYPE | HYDRAULIC | HYDRAULIC | |
| ENGINE MODEL | 4JR3ABZG | YCD4J22G | |
| ENGINE POWER (kw) | 87 | 85 | |
| SPEED (r/min) | 2400 | 2400 | |
| TYRE SIZE (FORWARD , REVERSE) | 16/70-24 | 16/70-24 | |
| DRIVING TYPE | FOUR WHEEL DRIVE | FOUR WHEEL DRIVE | |
| DIMENSIONS (mm) | LENGTH | 7310 | 7310 |
| WIDTH | 2140 | 2140 | |
| HEIGHT | 3150 | 3150 | |
| WEIGHT (kg) | 7300 | 7300 | |
Design of the HJ946GK mini wheel loader
The car is equipped with a large two-speed gearbox with an extra gear system to ensure high stability when entering heavy loads, the 18-liter visai bridge system / bridge is larger than the demand of the brands in the market, improved taplo. systems such as vehicle control panels help users easily observe the machine system while working.
Because the vehicle has a relatively large size with a self-weight of up to 7 tons, the factory designed the frame and iron is very sturdy, the chassis is designed according to the standards of U-shaped steel. not shaken under heavy loads, the body is made of two-layer original steel plate, cut with a high-tech CMC cutter that always ensures precision to every small detail because forks are an important part and It is also the part with the most direct load, so while the design only needs a small deviation, it can lose the accuracy of the project.
