Basic introduction of the HJ930 mini wheel loader
HJ930 small wheel loader is an upgraded engine compared to HJ 926 series. With a bucket capacity of 1.2 m3 and the price is suitable for the engine to lift capacity and improve the brake and gear system hydraulic. Simple operation, favored by many customers. Ideally suited for woodworking facilities or under heavy loads. The machine is full of basic structures to ensure the work of customers. When you buy a device, you are guaranteed 100% of spare parts for after-sales repair. All Hoang Giai HJ930 products are warranted, repaired and maintained carefully.
| Model | HJ930 | |
| RATED LOAD CAPACITY (kg) | 1500 | |
| RATED BUCKET CAPACITY (m3) | 0.8 | |
| MAX. GRADE ABILITY (º) | 30 | |
| MIN. TURNING RADIUS (mm) | 4500 | |
| MAX. SPEED (km/h) | 20 | |
| MAX. DUMPING ANGLE (º) | 40 | |
| MAX. DUMPING HEIGHT (mm) | 3160 | |
| DUMPING DISTANCE (mm) | 620 | |
| LIFTING, LOWERING, DUMPING TIME (s) | ≦13 | |
| WHEEL BASE (mm) | 2250 | |
| WHEEL TRACK (mm) | 1465 | |
| TRANSMISSION TYPE | HYDRAULIC | |
| ENGINE MODEL | 4B2-75M22 | |
| ENGINE POWER (kw) | 55 | |
| SPEED (r/min) | 2400 | |
| TYRE SIZE (FORWARD , REVERSE) | 20.5/70-16 | |
| DRIVING TYPE | FOUR WHEEL DRIVE | |
| DIMENSIONS (mm) | LENGTH | 5385 |
| WIDTH | 1940 | |
| HEIGHT | 2700 | |
| WEIGHT (kg) | 4150 | |
Spare parts are available for the HJ930 mini wheel loader
Hydraulic system: hydraulic valve, hydraulic cylinder, hydraulic pump, hydraulic hose, hydraulic cell ..
Electrical system: starter and generator, gearbox and gearbox controller
Other regions:
Air-conditioning system, brake system, gearbox
Pineapple gear + pot rim (position: transmission from gearbox to front – rear wheel)
Brake piston + brake piston ring (position: disc brake assembly), brake pads, brake assembly …
Register first, register later
Conical pump
Taper disc and steel plate number 1, clutch disc and steel disc number 2
Gear overload (two-speed gears increase the ability of two gears to rotate in the same direction thanks to a fish-style brake bridge – almost like a bicycle brake)
Motion control valve assembly (position: under the cabin above the transmission body)
Steering pump, lifting pump, steering wheel.
Lifting cylinder, rotating bucket cylinder
Bucket tooth, master brake, actuator + generator, pump, hand pump, engine cooling fan, belt, seal, engine seal, shaft seal, brake master, brake pedal, steam valve … .
Cylinder, piston, servo valve …
Types of filters: air filter, diesel oil filter, hydraulic filter, oil filter …
